Application/：

    Itis applicable to printing on sanitary product children's paper diaper and some kinds of shopping bag,garment bag,tissue package etc.

    Applicable substrates：

    1. Cast PE film

    2. Breathable film

    3.Treated PE film 38 dyne

    4.Paper

   Product features:

    1. High gloss, vivid color, no smell on printed matter.

    2.Good anti-blocking performance.

    3.Good scratch resistance good rub resistance.

    4.Good water resistance, good adhesion.

    5.Good printability anti-drving plate, excellent redissolvability.

    6Safety and environment protection, non-toxic, very little VOC residue, comply with VOC requlation.

   Color scope:

    Our standard color card is available and can mix basic colors to get popular colors accordingly.lf you have speciarequirement for color, please provide the color sample and our professional colorist will serve you.

   Service Conditions:    

   1. lt is water based ink and can be diluted by water directly. The ethanol can be added too if necessary. The diluent shouldbe mixed well before use. lt is not suggested to add water or ethanol while using ink.

    2. The pure water or distilled water is recommended. Do not use mineralized water or tap water because the metal ion frommineralized water or tape water may react with the resin from ink. The residual ink is liable to generate bacterium andstinks therefore.

    3. The printing speed should be 150-300m/min(please add more ethanol when printing speed is faster), adjust the inkviscosity according to printing speed.

    4. Drying conditions: The drying equipment(drying oven) is a must for printing machine. The drying temperature should be55-65°C. Within the affordable range, the higher temperature and greater air flow, the better for drying of printedmatter(The effect of air flow is greater than that of temperature).

   Storage conditions:

    1. Store at 5-35°C, keep away from direct sunlight, avoid freezing and high temperature.

    2. The shelf life for normal colors is 12 months, for Gold and Silver colors is 3 months.

    3. The diluted ink should be finished as soon as possible to avoid deterioration for long-term storage.

    4. Please filter the used ink with 200 mesh filtration fabric before reuse.

   Notes:

    1. Stir well before use.

    2. lt is for surface printing only, not for lamination.

    3.Please make adhesion test after 24 hours after printing.

    4.Please make sample test on different substrates before use.

    5. lf you have special requirement for long time sun-proof, light-proof, water-proof etc.please letus know before purchase.